Service:Clean dry gases compatible with wetted materials.Wetted Materials:PPS, acetal, sapphire, glass, epoxy, and fluoroelastomer.Accuracy:±3% of FS.Linearity:±3% of FS.Repeatability:±0.5% of FS.Temperature Limits:41 to 131°F (5 to 55°C); Storage: 32 to 158°F (0 to 70°C); Sensitivity: ±0.2% of FS per °C.Pressure Limits:40 psig (2.8 bar).Process Connection:Compression fitting, see model table on Catalog page.Power Requirements:11.5 to 15 VDC.Power Consumption:35 mA @ 12 VDC.Output Signal:0 to 5 VDC; minimum 2.5 kΩ load.Electrical Connections:Four-pin power and signal connector. A power adapter or mating cable required for operation. See accessories table.Enclosure Rating:IP10 (NEMA 1).Weight:0.16 lb (75 g).Agency Approvals:CE.